Premium Sediment Cartridge – Removes Dirt, Sand & Impurities

Upgrade your water purifier with a high-quality Sediment Cartridge! Removes dirt, rust, & sand for clean water. Universal fit, long-lasting & easy to install.

Product Advantages :

✔ Superior Filtration – Effectively removes dirt, sand, rust, and other particles, ensuring cleaner and safer drinking water.

✔ Universal Compatibility – Designed to fit most standard 10-inch RO water purifiers, under-sink filters, and whole-house systems.

✔ Multiple Micron Ratings – Available in 1, 5, and 10-micron options, catering to different filtration needs for homes and businesses.

✔ Extended Filter Life – Made from high-quality polypropylene, offering a long lifespan and reducing frequent replacements.

✔ Protects RO Membranes & Appliances – Prevents sediment build-up, which extends the life of your RO membrane, pipes, and appliances.

✔ Easy Installation & Replacement – Designed for a hassle-free setup with a simple twist-in installation process.

✔ Safe & Non-Toxic Material – Made from BPA-free and FDA-compliant material, ensuring no contamination of your drinking water.

✔ Cost-Effective & Eco-Friendly – A budget-friendly filtration solution with minimal maintenance required.

---

Product Highlights & Specifications :

Feature	Details
Product Type	Sediment Filter Cartridge
Material	Polypropylene (PP Spun/Wound)
Micron Rating	1, 5, 10 Micron Options
Size	Standard 10-Inch
Compatibility	RO Systems, Under-Sink, Whole-House Filters
Lifespan	3-6 Months (Depends on Water Quality)
Flow Rate	3-5 LPM (Liters Per Minute)
Operating Temperature	5°C – 45°C
Operating Pressure	30-100 PSI
Usage	Domestic & Commercial
Installation Type	Twist-in, Easy Replacement
Certifications	BPA-Free, FDA-Compliant

---

🔹 Product Customer Care Number

For any assistance, installation support, or warranty claims, please contact our customer care helpline at:

📞 Customer Care Number: +918800133166
📧 Email Support: care.aquafresh@gmail.com

Our customer service team is available Monday-Sunday, 

---

🔹 Product Related Do’s & Don’ts

✅ Do’s:

• Replace the sediment filter every 3-6 months for optimal performance.
• Flush the filter with water before first use.
• Check your water pressure before installation to avoid leaks.

❌ Don’ts:

• Do not use the filter with hot water (above 45°C).
• Do not install in reverse flow direction.
• Do not clean or reuse the filter once clogged.

---

🔹 Product Repair Troubleshoots :

Issue	Possible Cause	Solution
Low water flow	Clogged sediment filter	Replace the filter
Water has a bad taste	RO membrane affected by clogging	Change the sediment filter and flush the system
Leaking filter	Improper installation	Reinstall the filter properly

If the issue persists, contact customer support for expert assistance.

---

🔹 Product Service Guide & Future Service Schedule

• Filter Replacement: Every 3-6 months (depending on water quality).
• RO Membrane Maintenance: Every 12-18 months (Sediment filter prevents premature clogging).
• Annual Service Check-up: Recommended to ensure optimal performance.

To schedule servicing, visit our website or call customer support. 8800-133-166

---

🔹 Product Installation Guide

1️⃣ Turn Off the Water Supply – Shut off the main water connection before installation.
2️⃣ Remove the Old Filter – Unscrew the filter housing and take out the old sediment filter.
3️⃣ Insert the New Filter – Place the new sediment cartridge inside the housing correctly.
4️⃣ Secure the Filter Housing – Tighten it properly to prevent leaks.
5️⃣ Flush the System – Run water for a few minutes to remove air bubbles.
6️⃣ Check for Leaks – Ensure there are no leaks before using the system.

💡 Tip: Use a filter wrench if needed for easier removal.

---

🔹 Frequently Asked Questions (FAQs)

Q1: How often should I replace the sediment cartridge?
A: It should be replaced every 3-6 months, depending on water quality and usage.

Q2: Can this filter be used in all RO systems?
A: Yes, it has a universal 10-inch size compatible with most RO purifiers.

Q3: Does this filter remove bacteria and chemicals?
A: No, the sediment filter only removes dirt, sand, and rust particles. For bacteria removal, use a carbon filter or UV system.

Q4: What is the micron rating of this filter?
A: It comes in 1, 5, and 10-micron options for different filtration needs.

Q5: Can I clean and reuse this filter?
A: No, sediment filters are disposable and must be replaced when clogged.

Q6: How can I know if my filter needs replacement?
A: If you notice low water flow, cloudy water, or bad taste, it’s time for a new filter.

Q7: Do I need a professional for installation?
A: No, the filter is DIY-friendly and can be installed in 5-10 minutes.